As and when Alan Buttler (Modelu) does other signal lamps in 2mm scale the same will apply to them.
In 4mm scale you can also specify fibre optic lighting instead of smd leds at the same price. (These have 2 cables per lamp, one for the front and one for the back). However, Fibre Optic illumination is likely to be less bright.
N.B.
Of course Fibre Optic illumination can be used in the other scales at the same cost as SMD LED.
Please note that I can fit Modelu GWR and Adlake signal lamps in 2mm scale with SMD LEDS and it is also possible to illuminate other signal lamps using Fibre Optic cable with certain provisos.
The provisos are:
1) You accept that the amount light will not be as great as with an SMD LED led (which is approx lamp size and shape)
2) It is not possible to completely hide the fibre optic cable as it has to enter through the back light aperture.
3) It is quite tricky to drill out something so small as a 2mm scale signal lamp and consequently there will be an additional cost of £5.00. .i.e. £17.00 per lamp in all.
Bracket Superstructure 1 Bracket Post plus arms
Bracket Superstructure 2 Posts 1 Bracket plus arms
Bracket Superstructure 2 posts 2 Brackets plus arms
Bracket Superstructure 3 posts 2 Brackets plus arms
Bracket Superstructure 4 posts 2 Brackets plus arms
Bracket Signal Arms Add per Arm
Working Lamp fitted with LED or Fibre Optic
Jig Built Laddering per post
30ft Standard post Signal
Servo Fitting Service includes motor per arm
Higher than standard posts add
Tower Pro 9g Servo fitted
GWR small bracket pair of brass etches
Stevens All clear aspect shade three off
30ft etched brass signal post parts
Stevens large bracket (based on Seaton Junction down)
Stevens bracket (based on Seaton Junction up starter)
30ft tapered post kit in etched brass
GWR WR cash register working 2 routes
GWR WR cash register working 3 routes
45ft square tapered post kit
Extra arm on standard post